PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description
Car Audio Steering wheel interface allowing use of original buttons (including telephone button) with a new aftermarket head-unit. Use with Porsche cars with CAN bus and Quadlock connectors behind the radio.
The CANbus interface will generate an ignition power supply to the new radio. it will also give out an illumination signal, (orange) speed pulse signal (pink), reverse gear positive output (Purple), Handbrake negative (Green) and Mute out (Yellow/Black)
Car Audio Steering wheel interface allowing use of original buttons (including telephone button) with a new aftermarket head-unit. Use with Porsche cars with CAN bus and Quadlock connectors behind the radio.
Includes Ignition, speed pulse, reverse gear, handbrake and illumination signals.
This interface is for vehicles with standard audio systems. Cars with amplifiers may require an additional amplifier adapters or the amplifier may need to be bypassed.
Installation Notes
Blue wire (Antenna turn-on Output) - Connect this to the separate blue wire usually found on our antenna adapters (21-120K, 21-139k) If not present please ignore this, it is not required!
Purple wire (Reverse Gear Output) - This wire will provide a signal to the vehicle's head unit when the vehicle is in reverse. This will trigger the video screen to show the video from the backup camera on the screen.
Pink wire (Speed Pulse Output) - Some stereos / navigation systems have a speed pulse wire and this tells the new stereo how fast or slow the vehicle is travelling.
Green wire (Parking Brake Output) - If your new stereo has a touchscreen or video monitor, this wire acts as a switch to turn on the video monitor when the parking brake is engaged.
Yellow/ Black (Mute Output) - This provides a Signal to mute the car radio when in reverse gear so you can hear the parking sensor audio tones
PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. This links the steering control interface to the steering wheel control input on the back of the new stereo
Radio Being Fitted | Part Number | Short Description |
Chinese/ Unbranded | 49-000 | Patch lead for 49- Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereo. |
Alpine | 49-001 | Patch lead for 49- series steering wheel control for Alpine stereo. |
Clarion | 49-003 | Patch lead for 49- series steering wheel control for Clarion stereo. |
JVC | 49-004SW | Patch lead for 49- series steering wheel control for JVC stereo. |
Kenwood | 49-005 | Patch lead for 49- series steering wheel control for Kenwood stereo. |
Pioneer | 49-007 | Patch lead for 49- series steering wheel control for Pioneer stereo. |
Sony | 49-008 | Patch lead for 49- series steering wheel control for Sony stereo. |
Zenec | 49-011 | Patch lead for 49- series steering wheel control for Zenec stereo. |
Universal | 49-025 | Self pinning (instructions included) patch lead for 49- series steering wheel control for Alpine, Clarion, JVC, Kenwood, Pioneer or Sony stereo. |
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Porsche - 911 Coupe (991) (2012 - 2016)
Porsche - Boxster (981) (2012 - 2016)
Porsche - Cayenne 2nd Gen (958) (2010 - 2015)
Porsche - Cayman (981) (2012 - 2016)