Vehicle audio solutions since 2001
We also offer installation & fitting support. Ask us about fitting.
Vehicle-specific dual-lens high-level brake light camera for selected Ford Transit Custom models from 2016–2024 fitted with the factory LED high-level brake light.
Two independent cameras provide a dedicated reversing view plus a continuous rear-view image when connected to a suitable monitor, stereo or switching system. Features CVBS/AHD and NTSC/PAL video options, infrared night vision, IP68-rated housing and vehicle-specific high-level installation.
Includes a 10m 7-pin extension cable and 2 × 4-pin to 7-pin camera splitter.
PLEASE NOTE: If connecting to standard Video inputs (RCA/PHONO), an additional 2 × CVC-CB-09 converter cables will be required.
Improve rear visibility with this vehicle-specific dual-lens high-level brake light camera for selected Ford Transit Custom models fitted with the factory LED high-level brake light.
The dual-camera design provides two independent rear views. One camera can be used as a dedicated reversing camera, while the second can provide a continuous rear-view image when connected to a suitable monitor, stereo or camera switching system.
Both cameras are integrated into the replacement high-level brake light housing, creating a discreet OEM-style installation while maintaining the original appearance of the rear of the vehicle.
Two independent camera feeds allow one view for reversing and a second continuous rear-view image while driving.
Designed for selected Ford Transit Custom models fitted with the factory LED high-level brake light.
Replaces the original high-level brake light housing for a discreet, vehicle-specific appearance.
Available with CVBS or AHD video formats for use with compatible aftermarket stereos and commercial camera monitors.
High-brightness infrared LED support helps provide rear visibility in low-light conditions, with a night vision distance of approximately 30ft.
Designed for exterior vehicle installation with an IP68-rated, temperature-resistant camera housing.
A standard reversing camera is normally positioned to provide the best view of the area immediately behind the vehicle while parking or manoeuvring.
This dual-lens system adds a second camera that can provide a more conventional rear-view perspective. When connected to a suitable dual-input monitor or switching system, this can provide a continuous rear image while driving together with a separate reversing view.
This is particularly useful for commercial vans, campervan conversions, fleet vehicles and Transit Customs with restricted rear visibility.
PLEASE NOTE: This version is designed for selected Ford Transit Custom models fitted with the factory LED high-level brake light.
Vehicle variations can exist within production years. Compare the product photographs, dimensions and brake light housing with the original high-level brake light before ordering.
PLEASE NOTE: If connecting to standard Video inputs (RCA/PHONO), an additional 2x CVC-CB-09 converter cables will be required.
If connecting the cameras to the vehicle's original Ford SYNC display, an additional vehicle-specific camera interface may be required. If you are unsure which SYNC system is fitted, view our guide to identifying SYNC and which camera interface to use .
Always confirm the brake light type, housing shape and dimensions against the product photographs before ordering.
The current InCarTec vehicle database lists compatibility across Transit Custom MK1 and MK1 Facelift models through 2024.
| Sensor | 1/2.7 FH8536H + C2399 |
|---|---|
| Video signal | CVBS / AHD optional |
| TV system | NTSC / PAL optional |
| CVBS effective pixels | 728(H) × 488(V) |
| AHD 1080P effective pixels | 1920(H) × 1080(V) |
| AHD 720P effective pixels | 1280(H) × 720(V) |
| Resolution | 700–1000 TVL |
| Minimum illumination | 0.1 lux; 0 lux with LED active |
| IR LED | High-brightness LED |
| Night vision distance | Approximately 30ft |
| IP rating | IP68 |
| Current consumption | 150mA |
| Power supply | 12V standard |
| Voltage compatibility | 5V–18V |
| Connector | 4-pin aviation female |
| Operating temperature | -30°C to +75°C, RH95% max |
| Storage temperature | -40°C to +85°C, RH95% max |
| Material | PC plastic |
| Housing properties | High- and low-temperature resistant, flame retardant |
The dual-lens camera provides two independent video feeds using 4-pin aviation camera connections.
The supplied cable arrangement includes:
The two feeds can be connected directly to suitable equipment using compatible 4-pin aviation connections.
PLEASE NOTE: If connecting to standard Video inputs (RCA/PHONO), an additional 2x CVC-CB-09 converter cables will be required.
One camera feed can provide a continuous rear image when connected to a suitable monitor that remains active while the vehicle is being driven.
The second camera can provide a more downward-facing view of the area immediately behind the vehicle for parking and low-speed manoeuvring.
How the two camera feeds are displayed will depend on the monitor, stereo or camera switching equipment being used.
The camera specification supports CVBS / AHD and NTSC / PAL configurations.
The stereo or monitor must support the same video format as the cameras. An AHD camera output requires an AHD-compatible display.
CVBS is a conventional analogue video format supported by many aftermarket stereos and camera monitors.
Depending on the installation, the two camera feeds can be used with suitable:
If connecting the camera system to the original Ford display, the correct interface depends on which SYNC version is fitted.
View our guide to identifying SYNC and which camera interface to use .
If using standard RCA/phono Video inputs, an additional 2x CVC-CB-09 converter cables will be required.
Please Note: CVC-CB-09 RCA converter cables are not included.
A dual-lens brake light camera contains two independent cameras within the same high-level brake light housing. One can provide a reversing view while the second can provide a continuous rear-view image.
This camera is designed for selected Ford Transit Custom models from 2016 onwards fitted with the factory LED high-level brake light, including MK1 Facelift models through 2024.
Always compare the original brake light housing with the product photographs and dimensions before ordering.
Yes. One camera feed can provide a continuous rear-view image when connected to a suitable monitor that can remain active while driving.
Yes. The two cameras provide separate video feeds, allowing them to perform different rear-view functions when connected to suitable equipment.
This depends on the stereo. Many head units only provide one reversing camera input, so a dual-input monitor, camera switcher or compatible interface may be required to use both feeds.
If connecting to standard RCA/phono Video inputs, an additional 2x CVC-CB-09 converter cables will be required.
On compatible Ford SYNC systems, a vehicle-specific camera interface may allow connection to the original display. The correct interface depends on which SYNC system is fitted.
If you are unsure which version is fitted, view our Ford SYNC identification guide before selecting an interface.
AHD supports a higher-resolution image when used with a compatible AHD display. CVBS is a conventional analogue video format supported by many aftermarket stereos and camera monitors.
Yes. The specification includes a high-brightness infrared LED, 0 lux operation with the LED active and an approximate night vision distance of 30ft.
Contact InCarTec with the vehicle year, a photograph of the original high-level brake light and details of the stereo, monitor or Ford SYNC system being used.
Contact InCarTecBrand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Ford - Transit Custom MK1 (2012 - 2018)
Ford - Transit Custom MK1 Facelift (FAC/FAD) (2018 - 2024)
© Copyright 2026 InCarTec. All Rights Reserved
