BLAM SIGNATURE MULTIX S165 M2 FR 165mm (6.5 inch) 250W 2-Way full-range component system

Discover the ultimate sound experience with the Multix S 165 M2 FR 6.5 Inch (165mm) full-range component speaker set from BLAM, offering an impressive combination of precise technologies and high-quality materials. It consists of 2 x 165 mm high power speakers/ woofers, 2 x 80 mm extended frequency midrange drivers and two external 12 dB/ octave high-pass audiophile crossovers. Special features include the rigid 3K carbon fiber cone, the oversized neodymium magnet with 10 sticks and gold-plated connectors. Experience a new level of sound quality with BLAM MULTIX.

Composition

Woofer WS6 – HIGH POWER WOOFER

• 6.5 Inch (165 mm) speakers/ woofers
  
• Maximum power : 250 W
• Nominal power : 125 W
• Frequency response: 80 Hz – 6 KHz
• Sensitivity: 94 dB
• Impedance: 2 Ω
• Mounting depth 77 mm
• Die-cast aluminium basket – Ultra rigid 3K carbon fiber membrane – NBR surround – Double spider with integrated braids – 38 mm voice coil on fiberglass former – Oversized 10 sticks neodymium magnet – Machined aluminum phase plug – Gold plated terminal – Paired products at +/- 1dB

Midrange MS3 – EXTENDED FREQUENCY SPEAKER

• 3 Inch (80 mm) full range midrange
  
• Maximum power : 100 W
• Nominal power : 25 W
• Frequency response 120 Hz – 32 kHz
• Sensitivity 88 dB
• Impedance 3 Ω
• Mounting depth 44.5 mm
• Die-cast aluminium basket – Ultra-rigid carbon fiber membrane – NBR surround – Long-life “Conex” spider – 38 mm voice coil on fibreglass former – Ultra-powerful 8-stick neodymium magnet – Machined aluminium phase plug – Gold-plated terminal – Products paired at +/- 1dB
  

MULTIX WOMID AUDIOPHILE CROSSOVER

• Audiophile components
  
• 12 dB/octave high-pass crossover, frequency-adjustable from 150 to 500 Hz
• Low pass 6 dB/octave crossover

Technical Specifications (WS 6 Hi-Fidelity Speakers/ Woofers)

Technical Specifications Sheets

Dimensions

You might also require (Sold Separately)

• Trim Panel Tool Set - A must have for any installer who has to remove plastic trims, to avoid damage to the delicate finishes on both interior and exterior dashboards and panels. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.
• Speaker Grilles - If your car speakers are exposed then use speaker our 165mm Grilles for a more discrete appearance and offer a form of protection to kicks and knocks.
• Sound Deadening - Sound deadening can vastly enhance your vehicles sound upgrade by reducing sound vibration, eliminating outside road noise and creating a more acoustic environment, magnifying the sound quality of your system.
• Sound Deadening Tool - Professional sound deadening roller tool designed to allow even pressure when applying sound deadening on the surface of the car, minimising air bubbles and helping to achieve the best possible adhesion. 
• Speaker Baffles - Designed to fit any 165mm speaker, these adjustable speaker baffles creates a flexible seal around the back of the speakers, protecting them from water that gets inside doors and interior panels. Additionally it provides a barrier stopping interference between sound from the front and rear of the speakers from having a negative effect on sound quality.
• Led Headlamp Torch - Gives great visibility when working on a vehicle in the workshop, great for locating those dark hard-to-see locations during an installation.

• Disposable Gloves - Offer great protection for your hands during installations. Also trusted across various sectors, including automotive, agriculture, healthcare, food and catering, manufacturing, and more.